General Drainage
QDX-PA
Clean waterGeneral clean-water transfer family for garden and small irrigation sourcing.
- Power range
- 200–750 W
- Max. head
- 5–9 m
- Max. flow rate
- 5–12 m³/h
- Residual water
- 10 mm
APPLICATION GUIDE
Garden Watering & Small-Scale Irrigation
Check the flow needed at the full working head, including the hose and irrigation system. High maximum flow alone does not establish sprinkler suitability.
Selection
What to Check Before Choosing
01
Water Source
Describe particles, sediment and water treatment.
02
Required Flow
Check how much water the outlets need when operating together.
03
Required Pressure
Include the pressure needed by sprinklers, drippers or equipment.
04
Lift and Pipework
Add vertical lift, hose losses and fittings.
05
Operating Time
State the running periods and how the pump will be controlled.
Model Shortlist
Models to Compare
Use these models as a starting point. Check the water limits, controls and performance curve for the version you choose.
General Drainage
QDX-SC
Clean water304 stainless-steel clean-water family with listed max flow 6–10 m³/h.
- Power range
- 370–750 W
- Max. head
- 6–9 m
- Max. flow rate
- 6–10 m³/h
- Residual water
- 10 mm
General Drainage
QDX-PP
Clean waterCompact clean-water family with listed max head 6–7 m.
- Power range
- 250–370 W
- Max. head
- 6–7 m
- Max. flow rate
- 6–7 m³/h
- Residual water
- 10 mm
Check Water & Installation
QDX-PH
Clean waterUseful where the source tank also needs low-level clean-water finishing.
- Power range
- 250–370 W
- Max. head
- 5–8 m
- Max. flow rate
- 5–7 m³/h
- Residual water
- 7 mm
Check Water & Installation
QDX-PT
Clean waterPortable clean-water transfer for smaller systems; no float switch.
- Power range
- 200–300 W
- Max. head
- 5–7 m
- Max. flow rate
- 3–5 m³/h
- Residual water
- 7 mm
Check Water & Installation
WQD-PA
Clean & dirty waterConsider for debris-bearing source water within the 5 mm documented range.
- Power range
- 200–750 W
- Max. head
- 5–9 m
- Max. flow rate
- 5–12 m³/h
- Residual water
- 90 mm
Check Water & Installation
WQDX-PA
Clean & dirty waterAlternative clean/dirty-water platform for debris-bearing source water.
- Power range
- 200–750 W
- Max. head
- 5–9 m
- Max. flow rate
- 5–12 m³/h
- Residual water
- 90 mm
Check Water & Installation
WQD-SD
Clean & dirty water304 stainless clean/dirty-water option where source water contains soft solids.
- Power range
- 550–750 W
- Max. head
- 7–9 m
- Max. flow rate
- 8–12 m³/h
- Residual water
- 90 mm
Check Water & Installation
WQD-PH
Clean & dirty waterHigher-flow source-water transfer; verify the actual pressure/head requirement.
- Power range
- 750–900 W
- Max. head
- 10 m
- Max. flow rate
- 15–23 m³/h
- Residual water
- 90 mm
Check Water & Installation
WQD-PJ
Clean & dirty waterHigher listed head/flow range for larger transfer systems; still verify duty point.
- Power range
- 900–1300 W
- Max. head
- 11–15 m
- Max. flow rate
- 23–28 m³/h
- Residual water
- 90 mm
Selection Help
Need Help Narrowing the List?
Send the water condition, hose route and how quickly you need to move the water. We’ll help you compare a suitable model and power version.
Common Questions
Questions to Check Before You Choose
Can I choose by wattage or maximum flow?
No. The pump must deliver the required flow at the combined lift, hose losses and irrigation pressure. Check the performance curve for the exact version.
What should I send for a watering recommendation?
Describe the water source, hose length and diameter, height difference and outlets. Include the required flow or pressure if the irrigation equipment specifies them.
Next Step
Let’s Find a Pump for Your Application
Describe the water, hose route and operating time. Add your quantity and destination market if you’re buying for distribution or an OEM project.
Send Your Requirements