YARDPUMP · Buying Guide

Does a Double-Seal Spare Order Mean Two Seals or Two Faces?

A double seal describes positions in a pump, while two faces may form only one seal. Specify each position, matched parts and quantity per package.

Imagine a service note asks for “two seal pieces” and the order describes “one double-seal kit.” The supplier sends one rotating and one stationary face, while the workshop expects assemblies for two sealing positions. This can be a counting disagreement rather than a shortage. Identify the positions on the approved pump drawing, then specify what is included for each position and how it is ordered. Two working faces can make one pair; they do not establish that two mechanical seals are supplied.

Count positions, components and packages separately

A typical mechanical face seal has a rotating and a stationary face in relative motion. It may also include springs, elastomers and retaining parts. Its location is a position. The number of pieces making up the working pair describes the parts. The number supplied in a box describes packaging. A double mechanical seal describes an arrangement of two seal units. The two locations may use different materials, dimensions or orientations. A pump may also combine a mechanical seal with another type of seal. Two items drawn near the shaft are not proof that both are mechanical face seals. Use the approved drawing for the actual version.

Request a section or exploded view. Identify the liquid-side and motor-side locations and any chamber that is actually present. List each position code, purchasing part number, face pairing and whether elastomers and springs are included. If a component is supplied as an indivisible assembly, order that assembly rather than assuming it can be separated. Material and outside diameter are not enough to identify a seal; installed length and orientation can also differ.

Use a quantity example to expose the ambiguity

For illustration, suppose a workshop must repair ten specified pumps and each needs replacement at two mechanical seal positions. Each position requires one complete face pair and its specified components. The demand is ten sets for the liquid-side position and ten for the motor-side position. That can also be ten verified kits, provided each really contains both. A shipment of ten face pairs might cover only one of the positions, and the buyer still has to identify which one. These figures do not describe the construction or parts for any actual model.

Add two fields to the quotation: quantity per pump repaired and actual quantity in one package. List other service items separately and ask for photos of the packaged parts tied to the same drawing revision. Whether only one side needs replacement is a service decision based on diagnosis and the approved method, not something to assume when counting packs. Where a model has several revisions, identify the applicable serial or production range in the picking instructions.

Verify the receipt without damaging the protection

Check package numbers, seals, quantities and position labels before opening. Under the approved sampling method, verify internal contents and protection. Do not expose all precision faces on a bench or swap components between boxes. If the quantities in the drawing and instructions conflict, hold the stock and obtain clarification before receiving it as approved. Keep an incorrectly supplied kit in its original packaging. Qualified personnel should handle installation and isolation according to the product procedure. A useful spare order lets purchasing, stockroom and service point to the same location, build and quantity.

Align the commercial terms in both languages. If a line describes two locations, say how many assemblies it includes. If it describes one matched pair, identify its location. Have the supplier return the drawing and actual packaging unit against each order line.

Frequently asked questions

Do two rings establish that the pump has a double mechanical seal?

No. Two rings can form one working pair. Establish the number of mechanical seal positions from the approved assembly.

Can equal dimensions make the two sides interchangeable?

Not by themselves. Check material, installed length, orientation and the approved interchangeability.

Does every double mechanical seal arrangement have an oil chamber?

Do not infer the chamber from the shorthand description. Confirm the actual section, parts list and service instructions.

Related reading